Industrial desiccant

Particle size: 2mm - 4mm

Amount to use: depending on the range to be moisturized, use the amount of moisture absorbing more or less

Usage: Place the desiccant directly in the desiccant.

Both heavy industry and light industry today use production lines, the use of desiccant to preserve equipment as well as production lines is essential and can use a variety of measures. different moisture.

Use air humidifier to prevent moisture from condensing air and stick to equipment, production line. From there it can cause damage, short circuit, oxidation, etc., leading to loss of equipment and machinery.

Use a large amount of desiccant, wrapped in a cloth bag or a jute case close to the machine to remove the moisture absorbing particles in the air, to prevent water in the air from dampening the device's mold. factory.

With a number of components, specific lines can be used direct desiccant to contact the device to dehumidify the air, avoid moisture for equipment such as: in the slot of the device, between 2 sheets of glass, the slot of the device, etc.

Often, the wet environment is the cause of mold and food spoilage. Condensation of steam can cause damage, explosion of electronic products. Particularly in pharmaceuticals such as vials, contact with moist media will rapidly damage the drug. Therefore, the presence of hygroscopic packages is indispensable.

In the hygroscopic package contains a compound is silicon dioxide (SiO2). They are made from sodium silicate in natural quartz and then refined and processed into transparent particles, very porous with millions of tiny holes in the particle. Each cavity with an average hole size of 24 angstroms (1 angstrom = 1/10 billion meters) should have an extremely high exposure area (about 800 m² / g).

In particular, it can absorb and retain moisture due to capillary action in the cavity, the water vapor is absorbed and attached to the void inside the particle. Each particle can absorb up to 40% of its weight by steam and can reduce the relative humidity in the sealed container by up to 40%. Once they are saturated, they can be re-used by heating them at temperatures above 150 ° C for several hours. Because of the above characteristics it becomes a great desiccant that limits the growth of mold and reduces damage, helping to preserve durability.